Missing 4 knobs, but works perfectly. $200 plus shipping (CONUS)
This Digi002 has been sitting in my rack and has rarely been used (i have a second one that i used more). It still is in like new excellent working condition almost zero scratches. It comes power cable. Everything is ready and you just need a computer to set it up and start your studio recording section. The unit work 100% perfectly, as do all of the features and functions.
Features
FireWire connectivity (no PCI card required)
8 touch-sensitive, motorized faders
8 motion-sensitive rotary encoders used for pan/send/meter/plug-in control
10 scribble strips for track name, pan, send, fader, plug-in values, and timeline position
8 analog inputs, 8 analog outputs
4 mic pres with individual gain and high-pass filter; 48V phantom power enabled on channel pairs
8 channels of ADAT optical I/O, 2 channels of S/PDIF I/O
Outputs 1 & 2 mirrored on 1/4" TRS monitor output (with dedicated volume control) and RCA-based -10 dBV fixed output
MIDI I/O: 1 IN port, 2 OUT ports (16 channels IN/32 channels OUT)
24-bit/96 kHz A/D and D/A converters
Stand-alone mode: 8x4x2 digital mixer with EQ, dynamics, effects
Alternate Source Input for direct monitoring of -10 dBV audio equipment (tape players, CD players, etc.)
Headphone output with dedicated volume control knob included
Transport control
Digi 002 Specifications
A/D
Sample rate: 44.1, 48, 88.2, 96 kHz
Max Input:
Inputs 1-4 (mic): +3 dBu
Inputs 1-4 (line): +18 dBu
Inputs 5-8 (line/+4 mode): +18 dBu
Gain Range:
Inputs 1-4: Mic Setting: +18 — +65 dB; Line/DI Setting: +0 — +50 dB
Inputs 5-8 — fixed +4 dBu or -10 dBV
Mic E.I.N (unweighted): Inputs 1-4: -127 dBu @ 65 dB gain, 150 ohm source, 20 Hz — 20 kHz
THD+N @ 40 dB gain (mic input) @ 1 kHz: Inputs 1-4: 0.004% @ 1kHz, -1dBFS after 40 dB gain
THD+N (line input): see notes 1 and 3
Inputs 1-4: 0.004% @ -3 dBFS input level (minimum gain)
Inputs 5-6: 0.002% @ -1 dBFS input level
Inputs 7-8: 0.003% @ -1 dBFS input level
Dynamic range: see notes 1 and 2
Inputs 1-4: 101 dB A-weighted, 98 dB (unweighted)
Inputs 5-8: 108 dB A-weighted, 105 dB (unweighted) see note 5
Alt Source Inputs: 99 dB A-weighted, 97 dB (unweighted)
Frequency Response: see note 3
+0.15 / -0.5 dB, 20 Hz — 20 kHz
Input Impedance:
Inputs 1-4 (XLR): 2 kohm
Inputs 1-4 (1/4"): 10 Mohm
D/A
Sample Rate: 44.1, 48, 88.2, 96 kHz
Max Output:
Main, Monitor, and Outputs 3-8: +18 dBu
Alt. -10 dBV Outputs: +4 dBV
Headphone Outputs: +15 dBu, 150 ohm load
Dynamic range: see notes 1, 3, and 4
Main Outputs: 114 dB A-weighted, 112 dB (unweighted)
Monitor Outputs: 112 dB A-weighted, 110 dB (unweighted)
Outputs 3-8: 114 dB A-weighted, 112 dB (unweighted)
Alt. -10 dBV Outputs: 98 dB A-weighted, 95 dB (unweighted)
THD+N: see notes 1, 3, and 4
Main Outputs: <0.0016% (-95 dB)
Monitor Outputs: <0.0016% (-95 dB)
Outputs 3-8: <0.0023% (-93 dB)
Alt. -10 dBV Outputs: <0.0023% (-93 dB)
Frequency Response: see note 3
+0.15 / -0.5 dB, 20 Hz — 20 kHz
Output Impedance: 50 ohms
Note 1: Measurement made using balanced connectors
Note 2: ADC measured -60 dBFS method with a gain setting such that +24 dBu = 0 dBFS at S/PDIF output
Note 3: Measured relative to level at 1 kHz
Note 4: Measured with digital input at -60 dBFS @ 1 kHz
Note 5: Measured using "+4" setting
Dimensions:
Width = 18.9 in /48.3 cm
Diameter = 17.1 in /43.5 cm
Height = 6.1 in /15.6 cm
Weight = 15 lbs 3.2 oz /6.9 kg
FireWire cable = 6-pin to 6-pin, 12 ft / 3.7 m
