This is a rack case which has ratcheting mixer rails mounted at the top of the case and an 18.25" rack depth measured from the front rack rails to the rear rack rails. This is a 4 space model.
The slant mixer mounting portion of the case is designed to accommodate mixers with a rack mount requirement of up to 10U (17.5"). A longer front to back mixer of up to 21" (12U) is possible to mount in this case by extending a portion of the mixer into the front and back lids; however, the mixer rack rails are 17.5" long. The slant mixer rails are supported at the back with a ratcheting tilt mechanism which allows the mixer to be positioned at 10 different angles ranging from flat or horizontal to a maximum slanted position of 20 degrees.
The case side panels are constructed with 3/8 inch hardwood plywood and covered with a black ABS laminate finish. The extrusion is all double walled aluminum and the case is assembled with quality stainless steel rivets. The rivets on the 4 recessed padded flip handles are backed with washers to ensure strength and durability.
The case is equipped with 3 lids: front, back, and top. The lids are secured to the case using 4 medium sized recessed butterfly latches per lid and the top lid is secured between the front and back lids. Each lid has four heavy duty ball corners and the inside of the CU series lids are fully padded with medium density foam rubber. When the mixer rails are horizontal, there is approximately 2 3/4" of clearance between the top of the mixer rails and the inside of the top lid.
These are well made heavy duty cases manufactured to exacting tolerances and suitable for a variety of racking applications.
Front (All Lids Removed)
Side (All Lids Removed)
Back (Front & Rear Lids Removed)
Excellent Condition
$125.00 Shipped ConUS
