| M-AUDIO Omni I/O, E-MU 1820 comp recording cards
Sign in to disble this ad
m-audio delta 66 with Omni I/O. I'll get some pics up as soon as I can. No software. I'll supply drivers xp,vista and manual pdf.
140.00 shipped in the lower 48 ,pay-pal e-check preferred.
Features and Specifications:
Recording Section
2 Mic/Inst and 2 line level balanced/unbalanced analog inputs to the Delta 44 or Delta 66 sound card.
2 Mic/Inst inputs equipped with XLR phantom power, insert I/O jacks, individual gain controls, gain reduction "pad" switch, and signal/clip indicator LEDs.
Low impedance mic inputs provide 66dB of gain and utilize M Audios critically acclaimed DMP2 pre-amp technology. They are switchable to hi-impedance instrument inputs with 46dB of gain, ideal for electric/acoustic guitars.
The Omni Mic/Inst pre-amp has a frequency response of 10Hz to 200kHz, low THD of .0009%, with a dynamic range of 130dB.
Stereo effect return.
Mixing Section (all balanced/unbalanced on TRS jacks)
Four Delta outputs can simultaneously be used as independent balanced/unbalanced direct outs for use as additional effects sends, alternate mix output, or feeds to a secondary mixer.
Four stereo aux inputs for MIDI devices
Stereo Aux inputs 1 and 2 can be muted in the mixer and re-routed to the Delta line inputs for easy audio recording of MIDI instruments or other auxiliary inputs.
Mix out for recording to a mix deck.
Control room outs with independent level control for monitoring.
Two headphone outputs with individual level controls.
One mono effect send per channel.
L/R output signal/clip LEDs.
Next is a E-MU 1820 SOUND CARD It's a great card also everything works great here's some spects
E-MU 1820 Computer Recording System Specifications:
I/O Configuration:
2 TFPro Mic/Line/Hi-Z preamps (w/48V phantom power)
6 1/4" Balanced Inputs
8 1/4" Balanced Outputs
Turntable input (with ground lug and hardware RIAA preamp)
24-bit/192kHz ADAT In/Out (switchable to S/PDIF)
24-bit/96kHz coaxial S/PDIF In/Out (switchable to AES/EBU)
24-bit/96kHz optical S/PDIF Out (switchable to AES/EBU)
2 sets of MIDI In/Out
4 stereo 1/8" speaker outputs (configurable from stereo to 7.1)
Stereo headphone output
Firewire interface
System Features:
32-bit E-DSP hardware effects acceleration
Over 20 effects algorithms (more than 500 effects presets)
Plug-in effects architecture
Zero-latency mixing/monitoring
Intuitive drag-and-drop PatchMix DSP patchbay/mixing/effects interface
Compatible with most popular PC audio/sequencer software (ultralow latency WDM/DS and ASIO 2.0 drivers)
Package Includes:
E-MU 1010 PCI card
E-MU AudioDock
EDI (E-MU Digital Interface) cable (3 meters)
Headphone splitter cable
PC power cable
Quick Start guide
Operation Manual on CD-ROM
Creative Professional software CD-ROM
Windows 2000 and XP Drivers
E-MU PatchMix DSP
E-MU E-DSP effects Library
Audio software package on CD-ROM
Minimum System Requirements:
Genuine Intel Pentium III or AMD K6 class processor
or higher operating at 500MHz or faster
Intel, AMD or 100% compatible motherboard & chipset
128MB System RAM
500MB of free hard disk space for full installation
Windows 2000 SP 4, Windows XP SP 1 or greater
PCI 2.1 compliant slot for E-MU 1010 PCI card
CD-ROM or DVD-ROM drive required for software installation
XVGA Video (1024 X 768)
E-MU 1820 Computer Recording System Features:
18 inputs/20 outputs
E-DSP hardware-accelerated effects with over 500 presets
2 sets of MIDI I/O plus FireWire interface
2 TFPro Mic/Line/Hi-Z preamps
Compatible with most popular PC audio/sequencer software
Zero-latency hardware mixing/monitoring
I have to look but I think I still have original disks I'm asking 180.00 shipped to lower 48 Pay pal echeck preferred .will get pics soon.
The reason I'm selling these 2 great cards , I've gone to a firewire card . Both cards will work with xp or vista thanks.
Last edited by rdpbass : 12-29-2008 at 06:45 AM.
| 
