| KC Strings steel endpin
Complete endpin and rubber tip for sale. This is a 10mm pin that has been cut. The length is 14.5" to the point or approximately 15" including the rubber tip. On my smallish 3/4 bass there were still a couple of inches of additional height available.
The taper is approx 30-34mm.
These pins are unique because they have a locking spring in the adjustment screw so you know exactly when you are in the notch before tightening the screw. The rubber tips don't slip and really tighten onto the pin. It was on my bass for less than a year. The rubber shows some wear but not too bad.
They aren't shown on KC Strings site anymore so I don't know if they are still available but I paid about $135 and would like $75 $65 shipped.
SOLD
Sign in to disble this ad
__________________
You forget sometimes that you are playing music, not just playing jazz. ....Charlie Haden
Last edited by Greg Clinkingbeard : 01-18-2012 at 11:24 PM.
Reason: Photo added
| 
