G&L Bass ForumAddicts of Leo Fender's latest basses welcome here, as well as those interested in what drives the addiction to the basses from Fender Avenue.
I am looking for a hard shell case to fit my new G&L - L2000. The molded case it came with leaves a bit to be desired. I have noticed the case will give some when I have it on an unlevel surface and I am concerned the bass in side is moving. I have a Pbass case at home and it is long enough but the case is too wide for the L2000. It moves from side to side as there is about a 2 inch difference in width. Any help is appreciated.
I am looking for a hard shell case to fit my new G&L - L2000. The molded case it came with leaves a bit to be desired. I have noticed the case will give some when I have it on an unlevel surface and I am concerned the bass in side is moving. I have a Pbass case at home and it is long enough but the case is too wide for the L2000. It moves from side to side as there is about a 2 inch difference in width. Any help is appreciated.
tramp
My case was a little too wide for my bass. I took a simple way out and just took some foam strips from a packing box and cut them to fit on the inside of the case along both sides of the bass. It's now a snug fit. you can do the same thing if the case is too deep for the bass. Buy a foam pad that's about 1/2" thick from Walmart or somewhere and cut it to fit the shape of the bass body (place the bass on top of the pad and trace around the body on the pad). Then place trimmed piece of foam either on top of the bass or under it (or both) in the case. Should fit like a glove. A lot cheaper then buying a new case.
Tramp
