| You would have to plug two 4ohm cabs into each half of the power amp, bridging the 4pro requires at least a 4ohm load and you have a 2ohms.
You can plug the 4 and 8ohm cabs into separate sides of the amp; but make sure you adjust the levels to each poweramp half. This is done with the Level knob on the front of the amp and is very important, or else you'll probably fry the lower resistance speakers before the higher ones even start singing.
I would recommend the two 4ohm cabs to each half. 490w a side works wonders in most cabs.
__________________
"It's one of the great fallacies, it seems to me," said Lee, "that time gives much of anything but years and sadness to a man."
- Steinbeck, East of Eden
| 
