? about switching between reverb tanks
I'm thinking about putting two reverb tanks in a guitar amp with a switch in the combo cab to allow choosing one tank or the other. They're both long tanks, a 4-spring and a 6-spring, and there's enough room for both in the bottom of the cab.
It's my understanding that the signal path is:
amp > reverb input > reverb > reverb output > amp
I plan on running both of the outputs to something like a Y-cord, which will leave both outputs connected at all times.
And putting the switch between the factory reverb input cable and two RCA cables, one going to each of the tanks. I guess both grounds can be permanently connected, and just switch between the hot leads of the cables going from the switch to the tanks.
Will that work?
Originally Posted by Gaolee
I did my good deed for the day a month or two ago...