Advice on crossover

[CormacBass]

I have a bass rig that Id like to start using as my work horse, its not very good and I own one thats a lot better but I try not to bring my best equipment to most gigs.

Anyway this rig has a 400 watt power amp at 4 ohms going into a 2 x 10 cab @ 8 ohms and a 1 x 15 cab @ 8 ohms.
Im finding that the tens are moving to much with the bass and id like to split the signal to send the lower frequencies to the 15 inch speaker.

Ideally I'd like a passive crossover that I can install inside the amp.

I've spent days searching online for something. Even a kit would be great. Any help would be much appreciated.

[billfitzmaurice]

Originally Posted by CormacBass

Ideally I'd like a passive crossover that I can install inside the amp.

Passive crossovers install inside the cabinet, not the amp. You don't want to use a true crossover anyway. See this thread:

Speaker configuration advice?

[billfitzmaurice]

Originally Posted by CormacBass

So the Dayton Audio DMPC-60 60uF 250V Polypropylene Capacitor then?

For an 8 ohm load you only need one for the cab, not one per driver.

[CormacBass]

Thanks just saved me some cash. Unfortunately I cant buy this cap where I live (ireland) any ideas of anywhere else i can buy it online?