amp losing signal
I have an old school laney top and a ashdown 410t deep cab which are both a perfect combo, but lately they had some problems. My amp is losing signal, the volume cuts in and out. This happened after i used a bass effect. Does this sound like a top problem or a cab problem to you?
Thanks in advance!
This sounds like a possible effects loop problem. They can get corroded if you don't use them, and could probably use a good cleaning with Deoxit contact cleaner. Try that first of all...you can also run a plug in and out of each jack several times really fast if you don't have any contact cleaner.
Also, not sure if your amp has any tubes or not, but if it does and the cleaning doesn't work, might want to check that out next. Beyond that would require a tech.
|All times are GMT -6. The time now is 08:25 AM.|
Powered by vBulletin® Version 3.6.12
Copyright ©2000 - 2013, Jelsoft Enterprises Ltd.