Ampeg Micro VR Question

BulbousMoses · #1 04-05-2011, 07:56 AM

Can I just use the head for headphone practice (in other words, disconnect the cab) Or is that bad. I saw an earlier comment that suggested it wasn't good for the head not to have a speaker load.

MN_Bass · #2 04-05-2011, 07:57 AM

Since its solid state it shouldn't hurt the amp.

sevenyearsdown · #3 04-05-2011, 08:00 AM

I would also guess that the headphone jack will bypass the speaker outputs from the head when engaged.

GLEN18INCHSPICA · #4 04-05-2011, 08:04 AM

Amps with power tubes need a load (cabinet) to prevent damage. Your amp is solid state which does not need a cabinet connected.

BassBob1 · #5 04-05-2011, 08:06 AM

i believe use of the headphone jack bypasses all the other outputs on the amp.