Ampeg SVT-410HLF Horn Replacement

[moofeet]

Hello,
Was wondering if anyone knows where I can get a replacement horn for my Ampeg SVT-410HLF. Been trying to do a search but haven't come up with anything. Thanks!!

[will33]

You'd order the exact replacement Ampeg. That said, a lot of those type tweeters actually run pretty close to 8ohms at common pass frequencies so a different replacement that fits the cutout would do.

[moofeet]

where exactly would I order from Ampeg? I don't see an Ampeg store or anything on their site. Would I have to write or call them or something?

[shoot-r]

Originally Posted by moofeet

Hello,
Was wondering if anyone knows where I can get a replacement horn for my Ampeg SVT-410HLF. Been trying to do a search but haven't come up with anything. Thanks!!

Punch in "Foster/Fostex horns"...or maybe "fliptops.net", they may have them.

That'll bring up several sites that sell direct replacements.

The Fostex/Foster horn and driver is the same as the P-Audio PHT410 and HT410.
These horns are used in Ampeg, Avatar, Eden, SWR, Peavey, Roland, ect., ect.


(You might check on your cross-over's board to see if you might have just blown the light bulb/fuse. Take the cross-over off from the back of the cab, the bulb will be inside the cab on the front of the cross-over.
If it's just the bulb, the horn will probably still be good. Go to a local auto parts dealer with the blown bulb and get several replacements.)

[IglooBass]

Greetings,

I have an Ampeg HF from a 2-10 cab that should be the same one ... pm me if ur interested.

But - I would check the bulb as suggested - I'm betting you popped the bulb.