Ampeg SVT210AV Micro Cab

[jh90]

Was wondering If it is possible to hook 3 of these ampeg svt micro cab up to a 500W orange terror bass head. I know the 610 hlf has weird wiring which is why im asking. hope someone can help me out.

[mjac28]

Why three?

[jh90]

just wondering if its possible, and how it would work

[dDaddybass]

Is the Orange safe down to 2 ohms.

[RickenBoogie]

Yeah, that's the thing. If your amp is only rated for 4 ohms, then no, you cannot use 3 8 ohm cabs. Read the faq's and stickies for a better understanding on how all this stuff works.

[dmac1961]

4 ohm minimum on the orange, you could only run two. If your looking to cop the sound of an hlf, the 210av's are not going to do it.

[jh90]

the head has an impedance of 4 and 8 ohms ?

[sloppy_phil]

Originally Posted by jh90

the head has an impedance of 4 and 8 ohms ?

yeah, then as stated before, using 3 of those cabs will altogether add up to a 2 ohm load; not compatible with that amp.

[JimmyM]

If you're looking for HLF kind of tone in a smaller package that can take some righteous loudness, you're better off looking at the Portaflex line. Two of any of those cabs would pack a good low end wallop not quite as low as the SVT 410hlf but in that range. Even the sealed PF cabs have a goodly amount of lows. That said, I love the 210av's. Lighter on the lows than the HLF cabs of course, but sounds a lot like a small SVT 810.