Ampeg SVT3 Pro cab suggestions?

noisetherapy · #1 08-09-2010, 03:51 PM

Im looking for an inexpensive cab solution for my SVT3.

I don't want it to be too big, the head already weighs enough! Just looking for what my options are, as I'm not to keen on the math of it all.
anyone have this amp or could lend some suggestions?

Luis Fabara · #2 08-09-2010, 04:14 PM

The SVT3 is not heavy at all, you should try lifting the SVT2 PRO
If you want to use just 1 cab thats not too big the SVT 410HLF (4ohm)would be my choice.
A little more volume still on a size concious pack SVT 610.(4ohm)
If size wouldnt matter, the SVT-810E (4ohm) without doubt.

If you want to go modular, you could use a SVT410HE (8ohm), on top of another 410HE(8ohm) or a SVT-15E (8ohm)

Any choice you make, will lead to a 4ohm total load to get the most out of your amp.

I personally have the 810E and love it

correapa · #3 08-09-2010, 04:36 PM

This may help : I have an Ampeg SVT-3 Pro and use it with the SVT-410 HLF cab. As previously said, if you mind about size and weight, this is a VERY GOOD choice. Sound is loud, defined and also plenty of bass.
I play in a Cover Band and we mostly do Beatles, Eric Clapton, Elvis, U-2 and REM. We use a Fender Twin Reverb and a Fender DeVille 212 tube amps for guitars, so we definitely sound LOUD. For closed areas my rig is enough. If we go to an outdoor gig, I send a line through P.A.
Hope it helps you

EricF · #4 08-09-2010, 04:40 PM

With that amp, DEFINITELY use a 4 ohm setup (either one 4 ohm, or two 8 ohm cabs). If you're trying to keep the budget reasonable, check out Avatar's offerings.

RickenBoogie · #5 08-09-2010, 04:42 PM

Whatever you decide, you don't want to skimp on your speakers. They are arguably THE most important part of the whole shabang. The aforementioned SVT410hlf is a popular choice, and would do you well.

noisetherapy · #6 08-09-2010, 04:51 PM

thanks for the suggestions people.

so, keeping it compact would be necessary for the type of gigs I'm involved with. Any of you buy second hand? what kind of prices did you get your cab for? (if you dont mind me asking)

KeithBMI · #7 08-09-2010, 04:55 PM

I recommend the SVT-410HLF. That is what I have.

Gearhead17 · #8 08-09-2010, 06:27 PM

Maybe I am crazy, but if noisetherapy wants a compact cab and he is complaining about the weight of the 3 PRO, the 410hlf is a terrible choice. It weighs around 95 lbs and requires two people to lift into a pickup truck. The 3 PRO is around 40lbs.

I suggest looking into cabs with Neodymium speakers (usually labeled "Neo Cabs"). Neo loaded speaker cabs are generally MUCH lighter than your average bass cab. Many sound different than ceramic speaker cabs - but try a NEO loaded cab and see what you think. That is the easiest way to summarize the Neo versus Ceramic differences.

If you want to have one cab do the majority of volume - make sure it is 4 ohms and if you want to add another cab in the future, the one you buy now should be 8 ohms.

Used cabs can be a gold mine. Make sure to try them out before throwing the cash down. Bring your amp head and bass to audition the item. Used cabs are anywhere from 30% to 80% of the new price in the stores. Generally the more expensive a used cab - the better the condition. Be sure to always haggle and try to get a lower price. Somtimes people selling gear are really dumb and ask a price that is WAY TOO HIGH.

Luis Fabara · #9 08-09-2010, 06:38 PM

Ampeg+Ampeg=AMPEG

noisetherapy · #10 08-10-2010, 03:47 PM

thanks guys, i appreciate the suggestions.

thanks gearhead for the info. I'll look into it.

Toastfuzz · #11 08-10-2010, 03:56 PM

Well....I have an 8 ohm Ampeg 4x10, and an 8 ohm Acoustic 4x10. Personally they both sound badass to me on their own, double badass together. (The Acoustic gets more low end rumble than the Ampeg)

meatwad · #12 08-11-2010, 12:07 AM

Killer tone, best with eight tens @ 4 ohms IMHO.

Rods · #13 08-11-2010, 10:17 AM

You should get the PN-210HLF. Its a little pricy but its the smallest/most powerful/ best sounding Ampeg cab.

**bassman_al** · #14 08-11-2010, 10:47 AM

I used my Epifani PS112 and a Trace Elliot 1518c together to create a 4 ohm load. Those cabs together always did just fine. A lot of people say not to mix brands, speaker sizes, etc. To each their own. Here is how they sounded in the mix. Keep in mind I was getting some PA support here, but you can get the idea. The video is not professional, but its better than nothing. P-bass with Fender flats.

Wes Whitmore · #15 08-11-2010, 11:33 AM

The ceramic speakers are only 6 pounds a piece, some 2 pounds more than most neos. So 8-10 pounds heavier for the whole cab compared to a Neo.
I really like the SVT3 and that cabinet. My friend has been using that same setup for years.
Wes

bassplyr1960 · #16 08-11-2010, 09:02 PM

My personal preference is a USA SVT-210-HE and a USA SVT-15-E. You can find them used if you search hard enough. For both cabs I think I spent a little over $600. Then, just for my own head, I loaded them with Eminence Legends. ( another $275 ) Well worth it, handles whatever I throw at them, but that's just me.

Andrew266 · #17 08-11-2010, 09:21 PM

I have the svt-3 pro awesome head. Right now i have it on top of an svt-112he sounds sweet. Gets loud for a smal package. I'm waiting for my 410-hlf sounded tight when i tried it at sam ash.

buzzbass · #18 08-12-2010, 07:13 AM

I have mine paired with an old SWR Goliath series II. Sounds great.

BBKINGBASS · #19 08-12-2010, 07:27 AM

I have the mine paired with an SVT810E. If you don't mind moving the weight around it is a great cab to pair with it. You can find them for a nice price on the used market. I got my in decent condition for $400.

The biggest key is to go 4 ohm no matter what and if you want more volume, get more speakers.

**duff84** · #20 09-21-2010, 02:48 PM

i play mine with a pro 4x10 hlf, its wicked damnit. killer ampeg tone. i bet it kills with that 8x10.