Attenuator makes my Littlemark.... louder?
Here's one for the tech heads.
My amp is too loud for rehearsals (yeah, i know), in that it is working with the master vol at around 1 which makes control too sensitive. So I decided to make an attenuator to insert in the send/return loop. Less signal to work with means less to amplify.
I made a T-pad with 2x 5K resistors in line and a 22k pot to ground between them. Essentially a voltage divider.
The result:- with the the pot set to minimum (i.e. dumping everything to ground), NO CHANGE! but with the pot set to max resistance (almost no dumping) it got slightly louder.
How can resistors make it louder? Any clues? :confused:
Sort of makes sense. The default jumper places the effects loop in parallel rather than in series. Grounding the return (pot to minimum) disables essentially the effects input. When you minimize the resistance it puts it in parallel with some other resistance from the normal input. If you connect send to return with no resistance in between it looks like it should get louder so with some resistance (44k) in there, possible. One would have to go through the numbers to know how much.
Have you re-jumpered the effects loop for series (stock is parallel)? If it is still in parallel you are only changing the loading of the preamp.
I just tried shorting the signal directly to ground. No effect.
I didn't know about the jumper. now I do
Why would anyone want an effects in/out in parallel?
|All times are GMT -6. The time now is 12:23 PM.|
Powered by vBulletin® Version 3.6.12
Copyright ©2000 - 2013, Jelsoft Enterprises Ltd.