avatar 410neo 4ohms question

[DubBassfunk]

so ordered one of there babies and it arrived in 3 days from order and was is good condition and sounded great except that i noticed that sound was only coming out of the two left speakers. i hope i didnt get a defective one. anybody got any info or experience on this problem? thanks

[craig.p]

I've been inside my B212s and the wiring is solid, including the speaker-terminal clips. Still, it'd be wise to pull the rear plate, get in there with a flashlight, and see what's going on. Should be obvious, as in maybe a wire connecting one speaker's (+) to its neighbor's (-) fell off (or is missing). If it's missing, check around the bottom of the cab. It's a five-minute job max. The plate screws come out easy with a hand screwdriver -- no power driver needed.

[BassmanPaul]

Get a tech to check out the wiring of your cabinet. It IS sometimes too easy to make a mistake!

[username1]

The avatar 410 4 ohm uses 16ohm speakers all wired in parrallel. there are 2 sets of wires coming from the crossover, one going to each bank of 2 speakers which are connected to each other so i would assume the one set of wires going to the side that isnt working has become disconnected.