Cab repair question
Got a mystery cab handed to me.
Looks like the remains of a 1/15 combo, a Crate perhaps?
Anyway, after putting a speaker in it, the back was buzzing pretty bad.
turns out the bottom of the back and the base have separated from each other slightly.
(It's all pboard)
Any thoughts on how I could effect a repair?
Was thinking about gluing up the inside,
using a syringe (or a wedge to open it slightly) to get some in the crack from the outside,
putting a couple pipe clamps on it to hold it tight,
then hitting the outside with a brad nailer when dry.
Conan the Bassbarian
#36 Switch-hitters Club~#245 Yorkville/Traynor Club