EDIT:Never Mind, Won't Work.... Replacing the 4 ohm speakers in my AI cabs with 8 ohm

[jibreel]

I love the sound of my acoustic image speakers. However, they are 4 ohms so I can't use two of them with my 4 ohm miniumum heads.

Any recommendations for 8 ohm 10" speakers. I want really high quality.

For those not familiar, these cabs have a downward firing 10" woofer and a 5" speaker along with a tweeter on the front.

They can be set on all four feet, angled back or laid on their side which I often do so the speaker is facing out.

Edit: Ok, electronics are not my strong point. So I just realized that it is all three speakers that make up this 4 ohm system so I may have to replace all of them. I do have an email into Rick at AI so he will let me know. Still interested in any suggestions.........

[Bass_Pounder]

Your best bet is going to be what AI says.

Also, in addition to swapping all 3 speakers - you will also have to the change the crossover. Seems like too much work & too much expense if you ask me.

[Kael]

Originally Posted by Bass_Pounder

Your best bet is going to be what AI says.

Also, in addition to swapping all 3 speakers - you will also have to the change the crossover. Seems like too much work & too much expense if you ask me.

This.

[jibreel]

Originally Posted by Bass_Pounder

Your best bet is going to be what AI says.

Also, in addition to swapping all 3 speakers - you will also have to the change the crossover. Seems like too much work & too much expense if you ask me.

Yeah...... You guys are right. After I posted and then talked to another friend I realized the folly.

I will look for other speakers.

Thanks.