- Amps [BG]
|apollo18 ||01-27-2013 01:39 PM |
Gain vs volume vs bass (or low)
I bought a new combo amp (acoustic 115) and my question is when I'm turning it up to get louder, are you supposed to turn up the gain and volume in equal parts or turn the gain way up and the volume a little or vise versa? Turning up the bass works to but I'm asking because I don't want to damage anything and honestly I don't get why there is a gain and volume and not just a volume. Thanks for shedding some light on the situation for me :-)
Turn up gain to get audible, set your EQ to desired tone. Turn up gain until you clip, then slIghtly back off. Use main/master to adjust volume
|bongomania ||01-27-2013 01:57 PM |
"Gain" is the volume going INTO the amp. This allows you to get more distortion, or less. "Master" is the volume coming OUT OF the amp. This allows you to crank the Gain as high as you want, but still turn down the volume, if you want a driven sound but not so loud.
|Downunderwonder ||01-27-2013 02:26 PM |
The preamp section in that amp may or may not be capable of pleasant overdrive. Generally you want a full signal from the pre that isn't clipped unless it is pleasantly distorting. Generally with a passive bass I will max the instrument output.
|All times are GMT -6. The time now is 11:53 AM. || |
Powered by vBulletin® Version 3.6.12
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.