Genz Benz Shuttle 9.0 Going to Protect Mode
I was playing the other night with a band and was switching back and forth between GK 1001RB head they had in the room and my Shuttle 9.0 to get a feel for the differences. The stack was an Hartke 15" and an Eden Nemesis 4x10. The GK was cooking along no problem and keeping up with the rest of the band fine, but when I switched to my Shuttle it would temporarily cut out and the Protect LED would come on, usually only for a second or two. It seemed to happen when I was hitting notes harder than usual and especially if I dropped a hard low B. The limit light never came on, nor did the input overload light in the preamp section. I turned it down some both at the master and the preamp but it continued to happen. Any idea what might be the cause?