GK 1001 RB-II and GK 410 MBE... ?

[bassssificator]

I'd like to buy these two amps and use them together, but I'd first like to know you're opinion on these amps.

So please help me, thx .

[bassssificator]

GK 1001 RB-II (link): Welcome to Gallien-Krueger: Power to Groove
GK 410 MBE (link): Welcome to Gallien-Krueger: Power to Groove

[BassMan99]

I use the 410MBE with a 700 rbII. Its a pretty good match. I think with the 1001 you could blow this cab.
So watch your volumr.
I chose the 410MBE for its portability (size & Weight) for a 4x10 and its affordability.
It sounds pretty good. In my experience it does not have much in the real low end say below 80 hz or so. Being a sealed cab probably has something to do with that.

[gmarcus]

That is what I play. It flat out works! The 4 string voicing filter is set perfectly to clean up the boom that some people experience with that cab. Check the last post in this thread if you want to hear it at a gig. I had a couple of pedals in front of it (that I describe in the thread).

I've also played the cab with a shuttle 6.0 with good results. It is a warm sounding cab so tightly voiced amps tend to sound good through it.

GK 410MBE Mods