Hartke HX112 w/ Blown Tweeter...

45cmckay105 · #1 07-13-2011, 10:03 AM

Forgive my ignorance, but I have an HX112 cab with a tweeter that does nothing. Can I tell by resistance with a multimeter if the problem is the tweeter or the crossover??

Already email Larry as well, so I may already have a response!!

**TRichardsbass** · #2 07-13-2011, 10:36 AM

I'm guessing you have already checked to make sure the switch on the back is not in the -6dB position. That essentially kills the tweeter. in the on position you only get half the response of the tweeter. In the full on position you get all of the horn.

You checked that, right?

45cmckay105 · #3 07-13-2011, 10:43 AM

Appreciate the feedback, but yes, no noise from ANY of the (3) positions.

45cmckay105 · #4 07-13-2011, 02:35 PM

Larry and Joe strike again!!!
Replacement HF Driver on the way!!!

As always, thankful to be playing HARTKE!!!

genstormbringer · #5 07-13-2011, 02:36 PM

They r the best in terms of service great gear too. Hartke!!!! I am gonna keep the HX410

Rebmo · #6 07-13-2011, 07:49 PM

HX410 and HX115 here and love the combo. No problems at all I know I'm covered if there are any. Keep up the great work Hartke!