Hartke LH1000
 

Hi,
My question here is when I run a Hartke LH1000 in bridge mode, do I need a 4 pole speakon cable or will a standard 2 pole work?

"If you are using the LH1000 with a single cabinet of 4 ohms or 8 ohms, set the
BRIDGE mode switch to BRIDGE and use a standard Speakon cable to connect
your cabinet." http://www.samsontech.com/site_media...es_OM_v1_1.pdf.

Four pole with two conductors used is standard (only the 1+,1- conductors are used).

Thank You B-String for the quick reply!;)

No trouble! :)