There are several ways you can go. I used to use an Eden D410XST with a Hartke 210 on top and got really nice sound out of it. I ran that through the Eden Navigator Preamp to a QSC Power Amp which I used to balance out volumes. If you chain them, will definitely be louder (in my case, it was the hartke) With the power amp, you can balance out the problem Vince was referring to as you can have separate control depending on what you use to input your signal. I personally like using a power amp with crossover and devoting the bottom of my stack to strictly low end, the eden cabinets are punchy but not super low end heavy on bottom. Pre-Amp > Power Amp is much preferable to a PA head. Bheringer has their iNuke series which can be very powerful, cheap and lightweight. From what I have seen, they are solid.
Last edited by jorby : 02-25-2014 at 05:49 PM.