help with bass rig setup
simply put, i need to know if this is a good or bad idea, and ultimately if it will work. I am thinking an ampeg 8x10 with a qsc rmx 2450, and a tech 21 sansamp RBI.
Yes. And Yes :)
If so, then precisely how to actually hook this up and set the power amp so I am getting correct power output to the cab
Take the XLR out or the TRS from Sansamp into the QSC. Then the Speakon into the Left input of the Ampeg Speakon.
Set gain on Sansamp to desired level. Set Output of Sansamp to start at 1/2 and use QSC formain volume into Ampeg.
You may need to do some experimenting with Output of Sansamp opposed to QSC just for volume purposes. You might need to turn the Sansamp up so you arn't cranking QSC or the opposite.
Hope this helps...
|All times are GMT -6. The time now is 03:48 AM.|
Powered by vBulletin® Version 3.6.12
Copyright ©2000 - 2013, Jelsoft Enterprises Ltd.