Ok guys I just picked up a 110 and I like it so far, but Im pretty confused on how to hook it up to the pa or how to go about using a mic on it. Can anybody help me out?
using an xlr mic cable, hook the cable to the xlr out jack on the amp, then into the pa board. if you use a mic, aim it in front of the speaker and hook it up with the mic cable.
+1, put the mike in front of the spkr, if that's the plan, and I'm not sure that amp actually has an XLR DI output. It may have a 1/4" "line out", which would work the same way as Jimmy described.
