Help! Need a Power Amp for Bass, Synths and more!
I play keys, bass and synths. I need only for home playing and home/studio recording purposes.
Finding a solution for cab and amp to fit them all is not easy but so far my conclusion is:
Tone shaping will be done before any power amp with the gazillion of guitar/bass/etc. tube/whatnot preamp pedals and effect pedals out there. Even "amp in a stomp box" pedals.
So all I need is a Power amp that's CLEAN to put that into Cabs.
I DONT NEED xxx watts even if it's bass to be honest volume will be so low that even 30W are more then enough, as long as they stay clean.
Cabs will also be swapped around fir further tone shaping depending in application. So no combos. And NO KEYBOARD AMPS exclusively (John Lord wasn't using a Roland KC now was he;)
I feel this is the way foreword for total flexibility.
What do you think?
Problem is I don't see too much choice around. If anything most fall short on the voicing: a lot of interesting small amps are designed for guitar only and won't let pass low enough frequency.
So far I like:
EHX 44 Magnum - it lets all frequencies pass from deep lows to highs. Sounds clean and takes pedals well. IT'S CHEEEAAP!! At 150$ or so real bargain.
Problem: possible hum and build quality issues. No tubes. I'm a tube freak!
Carvin TS100: just discovered this. Has 4 tubes, looks like its as clean as hell, affordable. I don't need 100watts but at least it's not overkill.
Theoretically also let's pass a broad frequency spectrum.
Are there any other recommendations? I don't want to spend more than $500 (used also) ideally but I'm open to interesting products, though for example MesaBoogie stuff is out of question really.
I'm also open to a combined amp/head solution if you deem it good and clean /transparent enough. As said, I will be getting tone from pedals etc., not really from my amp. as I need to swap from keys to bass etc so no one trick pony will do.
Thanks for suggestions or shared experiences
30 watts is not going far if you use deep synth (recommend min 100 watts). Cabs start at an Avatar TB153, Acme B2 (needs power) or a fEARful DIY cab.
Crest Prolite2 for $325 shipped
I bought one of these, and for certain, it does come with the 5-year (non-transferrable) warranty.
These are two-channel amps, with the option of built-in 4th order Linkwitz-Riley crossover at 100 Hz.
I'm a bi-amper, so this saves me from need another 1RU for an external crossover.
This amp is a real performer, very solidly made. It will not disappoint.
[ edit ]
These are "open box" or some-such.
Mine came with a slightly bent rack ear... flannel cloth + big Channel locks and good as new.
The more expensive is virgin factory packing.
Mine was open, saved me $50, still comes with the warranty.
I'm not really planning on running PA, more guitar cabs.
I just discovered the Matrix GT800Fx stuff. This looks like it might be the answer, as it's stereo!
I have the exact product you need, however, it falls under my endorsements, so please PM me for details.
Hey bassgod.... You're right, disregard that, was my bad.
I was just thinking, could regular speaker amps be used to drive cabs? They however accept line signals correct? I have a Alesis RA300 could I use it for now to drive 2 cabs (as its stereo)??
Any more suggestions?? Or are these things only for guitarists!!
A good, solid, reliable power amp? Take a look at the Samson Servo series. I used a Servo 300 in my bass rig for a couple of years and had no complaints at all.
A good mixer and a pair of headphones will do what you want. If you want to use amps, look into the Mesa M6 Carbine, and use BASS cabs. I play synth every day, using a Mesa M3 into a small bass cab (right), and a Roland KC350 on the left. Stereo is the way to go with keyboards, and especially synthesizers. Guitar rigs will fall way short, and guitar spkrs will eventually shred to pieces.
Over on the Moog Taurus user forum, folks suggest using a powered cab, and recommend the QSC KW152 or KW 153.
The KW152 is two way (15" and compression driver) while the KW 153 is three way (15", 6.5", and compression driver).
Both use a 1000w QSC amp and are reported to work really well with the massive low end put out by Taurus bass pedals.
They're not cheap, but a dedicate synth system is pretty much a necessity.
Bass amps and cabs don't generally offer an uncoloured sound, and guitar gear likely can't handle much of the low output.
There was a Crown XTi 2000 in the TB classifieds lately for a crazy low price. Plenty of power and very light weight. Before you say it's too much power let me add that I sometimes use it with a single 10" speaker and it works fine.
|All times are GMT -6. The time now is 06:16 AM.|
Powered by vBulletin® Version 3.6.12
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.