Kustom groove bass 600

[mmccleskey]

Question. I'm upgrading to the groove bass 600 but I don't wanna upgrade my cab would it overpower my deepend cab or would I b fine running it since it'd be in my home studio?

[mmccleskey]

It'd be ran line out to the mixer I just don't wanna blow a cab

[IngerAlb]

As long as you don't crank the amp to the max, you'll be fine. Listen to your cab, when it starts sounding "funny" it's time to stop pushing the volume. If you have the DE410 cab, it's 400W@8Ohm, while the amp puts out 600W only at 2 Ohm; at 4 it's about 450W I think...so anyway the cab should be able to handle it

[mmccleskey]

Thanks that was actually helpful. But. I have the DE115 and it runs 250w @ 8 ohms. But it should still be the same theory right?

[IngerAlb]

I think so; the amp will put out around 300W@8Ohm, so as long as you don't push the volume knob too much it should work ok. The good thing about the Kustom amps is that they're pretty conservative reated, so it will be very loud even at half the power just make sure you listen to your cab and reduce the volume a bit as soon as you hear it making strange noises