- Amps [BG]
|rumblekat ||09-01-2013 03:56 AM |
marshall mb210 combo
Hi if i connect a 8hms 4x10 to the combo will i get 450wts or will i need 4hms cab thanks
|steve_rolfeca ||09-01-2013 04:31 AM |
I assume you mean the Marshal MB4210, and not the G-K MB210.
Either way, same answer. You need an 8 ohm cab, as the internal speakers stay connected when you add an extension.
Using a 4-ohm extension cab will either shut the amp down by tripping the protection circuits, or fry the amp. Probably the latter.
|Turock ||09-01-2013 05:31 AM |
With the MB4210 I believe you would need a 4 ohm extension cabinet.
|steve_rolfeca ||09-01-2013 05:41 AM |
When in doubt, check the manual...
|rumblekat ||09-01-2013 07:19 AM |
Thanks iv got mb4210 and peavy 8ohm 4x10 cab
|Turock ||09-01-2013 07:33 AM |
That should work, but the correct answer to your question is that you will need another 4 ohm cabinet.
|Turock ||09-01-2013 07:45 AM |
Also, the 2x10 will be getting twice the power than the 4x10 will be getting.
|rumblekat ||09-01-2013 07:50 AM |
Ok thanks so i will not get the full 450 wts it s a old cab i had in garage will prob get new 4 ohm
|All times are GMT -6. The time now is 05:21 AM. || |
Powered by vBulletin® Version 3.6.12
Copyright ©2000 - 2013, Jelsoft Enterprises Ltd.