Mesa Titan V12 at 2ohms?

[bass1107]

Anybody running a Titan at 2 ohms? It's probably not ideal since the Titan is 1200 watts @ 4 ohms & 840 watts @ 2 ohms. I think I read somewhere that Mesa cut the power @ 2 ohms due to the large amount of current it would drawl and possibly trip a breaker. Unfortunately, I have to run two 4 ohm cabs to keep up with a Marshal stack and a loud drummer miced. Plan B is two buy Two 8 ohm cabs or one 412 4 ohm cab. Not looking forward to hauling that heavy a cab or the expense of buying new cab(s). Any thoughts?

[Bass Collector]

When I bought my DB750 / GS412 rig I also tried the V12 into a Powerhouse 412... it was mighty!

I ended up prefering the Ag gear but the above is the way "I" would go if I were you - 1200w @4 ohms!

The larger tilt and roll cabs are pretty easy to move btw.

[Selta]

If you're looking for more volume, go for more speaker area over more wattage. You won't even notice 840W versus 1200W...

[sevenorchids]

Mesa 412...I can't imagine needing to be louder than a Titan into a 412.

[rockstarbassist]

The Titan + PH412 destorys all in it's path. I maxed my ex-Titan out at maybe 10:30 one time and that was in a very large venue and the sound guy was still getting mad! I still tripped breakers in smaller venues often!

[pickles]

840 watts will be plenty. Plan A sounds fine. Just make sure to put the switch in the 2 ohm position!