need ideas on power drop in Alembic F1-X/GK 700 rig.

[armybass]

I am running my Alembic F1-X into my GK 700RBII. I use the effects loop and totally bypass the GK. It is a great rig for the most part running into either one or two SWR Goliath's depending on the gig. The one issue I have is that nearly on every gig I feel the power start to drop. I still have a signal but I am getting no push. It is like the bottom drops out of my sound all together. The first time I had the problem it was really bad and my volume was almost nill. I switched to the GK and it was fine. Then I realized that the the power chord on the Alembic was loose. I pushed it all the way in and it was fine. So I was thinking that maybe I needed a new power chord for the Alembic. But now I have found that when it happens and I am in the middle of a gig....if I shut the power down to the whole rig and power it right back up all is fine and I can finish the night. This make me think it is not the power chord.....I am very perplexed now as to what could be the problem. Any ideas?

[armybass]

Never mind. Once again posting the exact same question on Facebook got almost an instant response and solution.

[BassmanPaul]

Originally Posted by armybass

Never mind. Once again posting the exact same question on Facebook got almost an instant response and solution.

And the solution???

[murphy]

I had to replace the power cord on my F2b.
Wonder if it was the same issue.
All fixed and good now.

[4Mal]

Fwiw - i had better results, (lower noise promarily) running an F2B into the instrument input on a 1001 RB II. It also made th GK's DI available and I could use the GK EQ to deal with room issues that would have been a pita with the Alembic alone. Also curious about the fix that the OP found. Seems like a pretty odd problem to me...