| To add to this a little, if you split the signal of your bass to feed two amps, I would probably always keep it in the "on" position just due to the slight level decrease you will get when splitting. Turning it off will make the signal a little louder for either single amp mode, which isn't want you want.
You can split numerous ways. The ABY pedal, or even a tuner with a bypass output (as well as the mute output) on something like a Boss TU-3 would also work for splitting the signal if you have one. You could silently mute if you don't have the Tiny turned on with that second ABY pedal.
One issue you will need to address is where to get the DI out. Hopefully your Ampeg's built in DI can be set post EQ, but also post EFX return. It probably is, but verify. You really want the signal right before it hits the Ampeg's power section. If not, you will most likely be forced to mike the cab or you won't be able to use just one DI to the FOH. That's what I'm thinking, anyhow.
Wes |