Yeah. But this is with the gain set low at low volume.
This amp adds distortion to the signal when master volume reaches 8-9 on a 10 scale.
Not due to the powerstage being driven to its max.
And when master is at 10 theres plenty of distortion added,modulated on top of the signal.
This is not a problem. Well it was a problem before I switched the EH tube against a Groove Tube.
Now the distortion is ok. If I knew how I would most certainly remove this feature from the amp.
I tried to remedy this by using a Au7 tube in place of the original At7 tube.
This "cured" the amp from adding distortion to the signal when the master volume went over 8-9 due to the lower gain structure of the Au7 tube.
So. This amp adds distortion even at low volume,with the gain set low,as soon as the master reaches 9 on a scale of 10.
Its simply a feature of this amp that I personaly is not so fond of.
Its not so much a problem Im trying to report. I just wanted to give owners of a Vb2 a tip on modding the amp into something different.
At first I thought it was something wrong with the amp,but after talking to Bobby about this and some other stuff regarding the Vb
-2, I learned that this is a feature that Bobby put into the amp.
He's a distortion afficionado.��