Power Amp Help! (QSC GX5)
So, I'm new to the power amp game and can't seem to get my set up to work properly. I'm using a QSC GX5 into an Avatar B212 Neo. Then I'm using a Tech 21 Oxford as a preamp. I plugged into the 1/4" input channel 1, then I'm using a 1/4" speaker cable from the channel 1 output to my cab. And I have the amp set to full range. It's not loud at all. The cab I'm using is 8 ohms, so I would think 500 watts would be adequate. Like, I can stand in front of the amp and it's conversation level with all volumes cranked. I've tried pushing the SansAmp switch on the Oxford in and out, doesn't do much.
Am I doing something wrong, or missing something?