re: Bass amp - Speakon Y adapter , 4 + 8 ohm cab question
I have a TC Electronic BH500 incoming, with the one speakon output
i have 2 cabs currently in the practice space,
4ohm Warwick pro 6x10
8ohm Gallien Krueger 2x12
i think the warwick 6x10 has a parallel output
is it possible to combine using both cabs with a Speakon Y adapter cable ? or through the parallel output on the warwick cab ?
i could just use the 6x10, but if i can use both i might as well ;)
You can only do it *IF* your amp is 2 ohm stable (which I believe it is not).
Your total impedance would be 2.67 ohms, and the 6X10 would get 2/3 of your power, with the 2X12 getting 1/3.
Not worth trying IMO due to power distribution issues, ohm load issues, mismatched cabs, etc/
use the 610 for big gigs and the 212 for smaller places.
don't run those cabs together, for several reasons.
Agreed with all above. There's no good reason to do it, but many reasons not to do it.
thanks everyone for the responses, very helpful =)
single speakon cable it is then :bassist:
|All times are GMT -6. The time now is 12:50 PM.|
Powered by vBulletin® Version 3.6.12
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.