TalkBass Forums

TalkBass Forums (http://www.talkbass.com/forum/)
-   Amps [BG] (http://www.talkbass.com/forum/f15/)
-   -   Running a head and cab same wattage? (http://www.talkbass.com/forum/f15/running-head-cab-same-wattage-956421/)

jarrah 02-08-2013 03:32 AM

Running a head and cab same wattage?
 
I have a Markbass Little Mark Tube 800 that outputs 500W RMS @ 8 ohm, 800W RMS @ 4 ohm and I'm about to buy an SWR Golight 410 that is 800W RMS and 4 ohm. Will this pairing be ok in terms of power output/handling?
The SWR has identical specs to the Markbass 410's that are marketed as being compatible with the Little Mark Tube 800.

Just looked up the tech manual for the amp and it says: 450W RMS @ 8 ohm, 750W RMS @ 4 ohm

Any info would be appreciated :)

tekdiver500ft 02-08-2013 04:26 AM

Absolutely no issues with this pairing.

CL400Peavey 02-08-2013 05:35 AM

Quote:

Originally Posted by tekdiver500ft (Post 13848636)
Absolutely no issues with this pairing.

+1

You can use any amp with any cab for the most part. You can also damage just about any cab with any amp if you do something stoopit.

tekdiver500ft 02-08-2013 06:03 AM

Yup, you can power a 1,000 watt cab with a 100 watt amp, or vice versa. You need to listen, though. If it sounds bad, it probably is. You can damage a 1,000 watt cab with a 100 watt amp and vice versa, too. Just pay attention, your speakers will tell you when they aren't happy anymore, and that's a great time to turn it down.

JimmyM 02-08-2013 11:55 AM

Quote:

Originally Posted by tekdiver500ft (Post 13848801)
Yup, you can power a 1,000 watt cab with a 100 watt amp, or vice versa. You need to listen, though. If it sounds bad, it probably is. You can damage a 1,000 watt cab with a 100 watt amp and vice versa, too. Just pay attention, your speakers will tell you when they aren't happy anymore, and that's a great time to turn it down.

Yep...rule of thumb is, "If it sounds like it's going to explode, it will."

BassmanPaul 02-08-2013 01:23 PM

Quote:

Originally Posted by CL400Peavey (Post 13848738)
+1

You can use any amp with any cab for the most part. You can also damage just about any cab with any amp if you do something stoopit.

+2 And to add a little to the last sentence: Typically cabinets are rated for their driver's thermal power handling (the point where they begin to melt). In real world use, the driver(s) will run out of excursion (the maximum distance the cones can move safely) at about half of that rating. Use your ears. If things start to sound bad turn down.

Russell L 02-08-2013 02:48 PM

Also, don't boost too many lows or it will make the speaker run out of excursion sooner. And if you do boost any lows, don't slap or let your hand bounce around too heavily on the strings for the same reason. Those spikes can be murder. If it doesn't melt the voice coil your speaker can at least lose its springiness by clanking against the frame. (Found that out the hard way, myownself)

jarrah 02-08-2013 06:47 PM

...
 
Thanks guys, I read through the replies and went out and bought this thing...holy crap it sounds awesome. Seems to handle the Markbass easily, even with the lows boosted and volume up around 70%. I don't think I'll ever need it that loud or I'm not gonna be able to hear the drummer I play with!
I'm very new to the amp+head thing as I've only ever had combos before. I don't don't have much experience to compare them to but this cab and this amp sound great together, actually able to dial in a variety of different sounds through the Markbass and the cab has an adjustable tweeter. Very lightweight too. It was a bit of a hard choice between 8ohm and 4ohm, but I doubt I'll ever play anywhere big enough to warrant a second cab...and I couldn't fit 2 in my tiny car anyway.


All times are GMT -6. The time now is 04:58 PM.

Powered by vBulletin® Version 3.6.12
Copyright ©2000 - 2013, Jelsoft Enterprises Ltd.