Small 6x10 cabinet
I am searching for a small 6x10 cabinet. Do they exist? I know the size of the Ampeg and SWR cab's, but I am looking of a lighter weight, smaller cab that is a 6x10.
Bergantino NV610. 3 feet tall, about 100 pounds.
+1 Bergantino NV610 is awesome. Pretty compact.
Other light weight 610 cabs would be:
MarkBass - Discontinued I believe / 70 lbs.
Ashdown - / 80 lbs?
Here is what I have found so far -
SWR Golliath Sr 23-1/2x36-1/2x18-1/2 115 pounds
Ampeg 610 SVT-610 HLF 24x40x16 110 pounds
Eden 610 XLT 23x38-1/2x16 130 pounds
Genz Benz 610T-XB2 25x44x18 130 pounds
Epifani UL610 23x42x18-1/2 82 pounds
Bergantino NV610 24x36x15 100 pounds
Markbass 106HF 23-1/2x45-1/4x19 99 pounds
Carvin does not make a 6x10
Schroeder 610 23-1/2x32x16 78 pounds
Mesa Powerhouse 610 24-1/2x36-3/4x19-3/4 134 pounds
Ashdown ABM 610 24-1/2x35-1/2x17-1/2 84 Pounds
Fender Bassman Neo 610 26x36-1/2x16-1/4 90 pounds
You might also want to take a look at the LDS 6x10...I have no experience with this cab, but wanted to through it in the mix...
Called and left a message for them. Some spec's would be good.
If you can find one, the Markbass CL106 (70 pounds and 34.5 inches tall) or the Schroeder 6x10 (78 pounds and 32 inches tall).
+1 for the Markbass CL 106. Although I admit I never played through one, I always thought the Markbass CL 106 sounded like a brilliant concept. And only 70 lbs. I wish they still made 'em. Of course, if weight isn't an issue then there's the Berg 610. It would be great to see a NEO version of that 610 Berg.
That's easy. Bergantino. Plus it's the best.
And they don't make them anymore. Let's not forget that detail.
I did not find the CL 106, but I did find a 106HF for the Markbass. 99 pounds. And the dimensions are too big for what I am wanting. Which by the way, I am starting to think that what I want does not exist.
Let's take into account the basic physics of fitting six 10" drivers onto a baffle. At the impossible minimum, you're looking at 20x30 inches. Add at least wood on each side and the fact that you need at least some measurable space between the drivers on each side and I've gotta think 23 x 36 is about as small as can be possibly expected. Depth is another thing entirely. The only way to get smaller would be to build some kind of band-pass enclosure with half the drivers inside a smaller dimension, but then you're just building a subwoofer and not a full-range bass amp cabinet.
I have a Schroeder 610 and it's light and fairly easy to move.
I have to replace my 8Ohm single 12 and the 8Ohm 1212 that sits under it. So my total height that I am going for is about 32" (can be higher) but only 28" wide (1212). So, if I could find 3x(1212) cabinets in 1 cabinet, that would probably work.
I know it really makes sense in my noodle. Also, what I am looking for is an 8Ohm cabinet as well. I am having to replace my amp and will only be able to do 4 Ohms. So, I need to find out some sort of speaker system and amp that will replace what I have, but don't want to replace. (My amp is beyond repair).
|All times are GMT -6. The time now is 03:46 AM.|
Powered by vBulletin® Version 3.6.12
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.