Specific Peavey BAM model.

CrawlingEye · #1 02-12-2002, 08:14 PM

Ok, here goes:

I've been thinking about picking up a Peavey BAM head, and possibly trading/selling my cabs.

I really only like the one model on the BAM, though.
I found it on the BAM 210.

The model is
"Amp: MAX"
"Cab: Fliptop 1x15"

Does anyone know specifically what cab the "fliptop 1x15" is refering to?

...seeing as it'd probably be more intelligent just to buy the MAX and perhaps two fliptop 1x15"'s, as far as tone goes...

I all ready know that the MAX is for the T-max head/preamp. If I do decide to go this route I'll probably get the T-max preamp and pick up a carvin power amp, or possibly a Peavey (depending on the bang-per-buck).

Another question...

Does anyone know how much the BAM heads even cost? I haven't really been looking too hard...

PolkaHero · #2 02-12-2002, 08:31 PM

The "fliptop" refers to the Ampeg B-15 that many recording studios still swear by. These came out in the early 60s and were all tube with a 15" speaker. The head "flipped" out of the cabinet to reveal a combo amp. Pretty cool.

Didn't know that Peavey's making a head version of this amp.

By the way, the only sound I kinda liked on the BAM was the Acoustic 360=phat.

Ty McNeely · #3 02-12-2002, 09:45 PM

Quote:

Originally posted by CrawlingEye

If I do decide to go this route I'll probably get the T-max preamp and pick up a carvin power amp, or possibly a Peavey (depending on the bang-per-buck).

Speaking of which....

I was on the <a href="http://www.carvin.com">Carvin website</a> looking at ndjx's amp earlier, and I noticed that they have a <a href="http://www.carvin.com/cgi-bin/Isearch.exe?CFG=2&P2=DCM2000&P1=PWA">DCM2000</a> for $539. Thats 2000 watts for $539

Like $.27/watt man!!!! Too bad I ain't got the moolah...I'd be droppin' my gear for a component set!

Slater · #4 02-12-2002, 10:33 PM

CrawlingEye, maybe you should try your FireBass with an Ampeg Classic cab.

http://www.ampeg.com/products.htm?catid=11

It might sound close to the BAM setting that you like, and you might save your self some $$$

...

...or, you might not like it at all

.

One thing to keep in mind is that the BAM setting you really like in the store might not cut-it when you're playing with a band.

CrawlingEye · #5 02-13-2002, 12:27 PM

Quote:

Originally posted by Slater
One thing to keep in mind is that the BAM setting you really like in the store might not cut-it when you're playing with a band.

Wha?
I didn't mention EQ or anything, and you're telling me my setting won't cut?

Anyway... I think I might try an Ampeg 15" with my T-max preamp, if I can find a place the carries both.

I just looked into it more, and I've noticed that the BAM has a variable mid, while the T-max has a graphic EQ. I think this could prove the BAM better for what I was doing, since I'm really precise about my boosts/cuts.

Slater · #6 02-13-2002, 01:45 PM

Quote:

Originally posted by CrawlingEye

I didn't mention EQ or anything, and you're telling me my setting won't cut?

I said it might not cut-it.

It might sound great...

rcrimm · #7 02-13-2002, 03:32 PM

The "Peavey Max" model on the BAM isn't really modeled after a Max or T Max amplifier. Basically that "model" is just our attempt at putting all of the best features of Peavey Bass amps into one model.

Why the hell they had to call it "Max" I don't know, I guess to be confusing as possible. They don't ask me when they name these things, but I digress...

The eq is semi parametric, and is probably closer to the Firebass or Nitrobass than it is to a Max.
The analog overdrive on this model IS similiar to the T Max tube channel. With the overdrive off you could get close to the ss channel on the T max.

I would think that a Firebass with a 115 cab would be pretty close to that model. To get there with a T Max you would probably need to add a parametric in the loop or something.

Hope I didn't add to the confusion...

jcadmus · #8 02-13-2002, 03:38 PM

FWIW, Bass Player magazine reviewed the BAM last month and provided a key to decipher all of Peavey's cryptic model names.

Might be helpful to those looking into this amp.

rcrimm · #9 02-13-2002, 03:59 PM

Yes, Bass Player gave us a nice write up on that one. They nailed just about everything (except for the Max thing).
They didn't say much about the effects, which is understandable I suppose. Most bass players, me included, have little use for flangers and such. I did like the octave divider and the chorus though. The compressor on there is also one of the nicest sounding and easiest to use comps I have tried.

It is a great sounding amp with or without the effects. Just playing around with the amp and cab swaps could keep you busy for days.

Wxp4759cb · #10 02-13-2002, 04:54 PM

You could try just getting the BAM head, and a ampeg 15. That might sound cool.

Although I think that an ampeg and a head would probably run close in $ to the BAM, and since you already like the BAM tone for sure, why not get it?

O well.

Have fun!

CrawlingEye · #11 02-13-2002, 10:41 PM

RCRIMM, which 115 would you suggest? BXBW or Pro?

I have the BXBW, so I'm all ready half way there, if that's the case. (just get another 15")

Thanks for all the replies, as well.

If I can get close enough, or the tone I want, with the equipment I have already, then that's all the better. I think I'd need to get another 15" though, considering my 15" doesn't seem to pump out enough volume for me to make an accurate judgement. (I'm very anal about this type of thing, since certain frequencies become more apparent when the amp's louder)

CrawlingEye · #12 02-14-2002, 07:50 PM

bump?

ndjx · #13 02-14-2002, 08:59 PM

Since we're talking about the new Peavey Bam head, has anyone got the chance to try out the Pro 500 bass head?

P.S. I just noticed you like Hot Water Music CrawlingEye, me too!

CrawlingEye · #14 02-14-2002, 09:42 PM

Jason from HWM has to be one of the best bassists, and he is definetly my largest influence.

...and I'm interested in hearing what people thought about the Pro 500 as well.

rcrimm · #15 02-15-2002, 08:01 AM

I haven't tried a Pro 115 yet, we are still doing prototypes right now. Don't look for these till later this year, *maybe* by late spring or early summer.
The BXBW is a good one though. You could get close, but the BW is very efficient in the midrange, and not very "B-15 like". I like the Eminence we are using in the Combo 115 better.

I tried a prototype of the Pro 500 briefly. I liked it ok, the tube preamp is nice and warm, and the true parametric eq was nice. It will take some dialing in. Parametric eqs are tricky, but worth it imo.

CrawlingEye · #16 02-15-2002, 03:28 PM

Thanks, Roger.

Do you know when they plan to ship the BAM heads?

PawleeP · #17 01-18-2013, 02:19 PM

any one else have opinions on the effects? of the BAM specifically the flanger chorus and octaver? P

makohund · #18 01-18-2013, 02:31 PM

Brainzzzzzzzz

wideload · #19 01-18-2013, 04:40 PM

I have a BAM 210, and I got it because I thought I could have everything I might ever need. My problem stemmed from what I thought sounded good, and what worked (for me) live.

I still use the combo at church, but I fronted it with an Alembic F1-X (bypassing all the Peavey features and using it as a power amp and cab), and immediately got what I was looking for. YMMV