Originally Posted by Cau Marini
i am looking for replacement speakers for a Trace Elliot 7210H 2x10 rated 300w 4 Omhs.
I can't find the standards which are 100w 16 Ohms each (Celestion spl designed).
My question is: Is it safe replace them for some more powerful speakers like 150W or 200W in the same 16 Ohms, and then i intend to connect a 1x15 8ohms cab with it.
Will i have any loss of impendance or damage some of those devices?
What is the best modification in this parameters could be done to get more volume with safety out of this mini stack?
Thanks a mill
Yes, you could use higher wattage speakers as long as they are 16 ohm wired parallel for an 8ohm load.
You can add another 8ohm cab safely.
1028, 1048, 1518, 1153,1528 cabs will work.
as long as you use another 8ohm cab.
That will give you a 4 ohm total load.
The amp has a 4 ohm minimum load requirement. If you go less than 4 ohms, you will damage the amp.