Upgrade Thunderfunk 550A to 600B
I am considering doing the 600B upgrade and was curious if anyone had done any of the TFunk upgrades.
I gigged with the 750A for a few years and sold it when I bought an Aggie DB750. Having grown weary of the DB and not really needing the extra 150 watts that the 750A would bring, yet wanting 2 ohm capability... opinions?
If you need 2ohm operation, then upgrading probably makes sense. Remember, the 750 really doesn't put out much more wattage than the 550b into 4ohms (both the 750 and 800 names are based on max 2ohm wattage). So, if you are going through the trouble of sending it back, I'd just get 'er done and get the most significant upgrade you can get (800?). Again, volume won't be much different... just a more open low end, and with the 800, cooler 2ohm operation.
I haven't had any upgrades to my Thunderfunks........yet. However, I would not hesitate getting Dave to upgrade either of my heads.
I plan to get the 750 upgraded next year, not from the need of extra volume or anything like that, I just want it beefed up a little.
I would suspect that the 550 could only be upgraded to the 600. I believe there is enough difference between the 550 and 750 platform that it wouldn't be possible to upgrade from a 550 to a 750/800. But that is just my guess.
I do know that the physical dimensions of the 550 and 750 are different.
|All times are GMT -6. The time now is 11:46 PM.|
Powered by vBulletin® Version 3.6.12
Copyright ©2000 - 2013, Jelsoft Enterprises Ltd.