Upgrading the inputs on a Eden 210XLT

[Nate74]

I had a chance to play through an Eden 210XLT recently and really liked it. Not $750 worth however so I found an older model in very good shape for about half. Only problem is it only has Banana plug and 1/4" inputs and I've been using Speakons for quite a while. I know I could cut a hole and modify the input plate but was wondering if anybody here knows if you can get a current input plate from Eden to replace the older style ones for the 210XLT?

[eastcoasteddie]

Your best bet to get an answer would probably be to contact eden.

I modified my SWR Goliath II plates (1996 units) and just drilled the holes. I have found that sometimes when manufacturers change something as simple as a type of input jack (especially when upgrading models like the Goliath series cabs), they may change the design of the entire plate, including its dimensions.

[Rick Auricchio]

The Eden jacks are part of the crossover assembly, so there isn't much room to fit a new jack.

The replacement is the jackplate and crossover assembly; when I checked a couple years ago it was about US$80.

[Nate74]

Cool and thanks! I emailed their support group but I've never had much luck emailing OEMs with requests like this.