- Amps [BG]
|ric4682 ||01-01-2014 09:53 AM |
Warm, loud amp...that does 2 ohms???
I'm picking up a second Ampeg 4 ohm 15 cab to use with my Ric 4003 and so my PF500 just isn't going to cut it anymore. Which is too bad because I LOVE the tone but I don't want to get a power amp and just use it as a pre-amp just so I can use my cabs...but I love the cabs just a little bit more. Besides the Carvin B2000 (tried it and I couldn't dial out the grindy, edgy, modern-y tone) which amps that are less than, say $700, go to 2 ohms? It has to be at least 500 watts. I've looked into the Hartke LH1000 and that seems like a decent option. I like warm, fat, thick bass tone.
Give me some direction!
|Tractorr ||01-01-2014 09:55 AM |
Why not just use a power amp and drive it with your BDDI?
Would be an option that would cost way less than 700.
|lobster57 ||01-01-2014 09:57 AM |
old Traynor Monobloc II
|jbassmaniac ||01-01-2014 09:58 AM |
The Hartke is a good choice. Their customer service is top rate. Genz Benz Shuttlemax 12.2 can go to 2 ohms and can be dialed in on the tube side to be warm n fat. the Carvin BX500 can run 2 ohms and can dial fat but I don't know how fat. You nay need to run an Aguilar Tonehammer as a preamp to get that fatness.
|jbassmaniac ||01-01-2014 10:03 AM |
You may just want to run a fat tube pre with your power amps. Like some of the studio pres that are out there, or the Tonehammer or Trilogic II from Xotic/EWS. BBE makes a nice Tube Preamp.
|ric4682 ||01-01-2014 10:03 AM |
I have a Sansamp Paradriver that I run in front of my Ampeg for ultimate fatness but I've tried it direct into a power amp and doesn't sound as full an the mids aren't as thick. I'll have to check out that Traynor and that Genz Benz. Does anyone have any experience with the Ashdown ABM 900?
|ric4682 ||01-01-2014 10:05 AM |
Also, I'm not opposed to tube heads as size and weight are no concern. My 115's are over 100lbs each! I just would want to make sure I have enough clean headroom to get LOUD and clean and fat.
|Jim C ||01-01-2014 10:09 AM |
If 300 watts is enough, the Mesa Walkabout should be on the list.
Warm, smooth, very adjustable with the para EQ section, well built and very reliable.
Can sound VERY Ampeg like IME.
Approx. $500 used.
|Jaco who? ||01-01-2014 10:21 AM |
The Shuttlemax 12.2 is a two sided 4Ω amp. The highly unfashionable GBE series genzbenz will all do 2Ω though. Very warm or gritty or any other sound you want.
The Carvin BX500 will operate @ 2Ω, although it's 4Ω power is the same.
|ric4682 ||01-01-2014 10:21 AM |
Unfortunately, I don't think 300 would be quite enough. Even if it is, it's better to have it and not need it than need it and not have it.
Originally Posted by jbassmaniac
. Genz Benz Shuttlemax 12.2 can go to 2 ohms and can be dialed in on the tube side to be warm n fat.
The Genz Benz 12.2 can not opoerate safely at 2 ohms. It can operate at 600w @ 4 ohms x 2. There are two power modules in the amp, one for each side.
|ric4682 ||01-01-2014 10:23 AM |
It makes no difference to me whether it's an amp is two sided @ 4 ohms or one sided @ 2 ohms as long as it's loud and can run two 4 ohm cabs and does so with thick angus beef steak tone.
|39-Bassist ||01-01-2014 10:27 AM |
You need to use the CARVIN BX 1500.....Awesome sounds and very diverse.....
|Chazinroch ||01-01-2014 10:28 AM |
Aguilar DB750....900watts at 2 ohms. I have one for sale PM me
|Big Joe ||01-01-2014 10:30 AM |
Save up a little more and then go SVT
|jeff7bass ||01-01-2014 10:51 AM |
|Jim C ||01-01-2014 11:14 AM |
If a 300 watt Walkabout isn't enough then neither would the SVT (assuming inefficient or single driver cabinet)
I had both and A/B'd then many times; the overall output and girth were very similar
|ric4682 ||01-01-2014 11:19 AM |
That's okay, as much as I would love to own an SVT they're a little out of my price range anyway.
|heliotropic ||01-01-2014 11:25 AM |
Look into a Mesa M6 Carbine - http://www.mesaboogie.com/Product_In..._Amps/carbine/
It'll do 600 watts at 2 ohms, with all controls at neutral it has an aggressive clean tone, but it won't get too grindy and can easily be dialed into a fatter sound, and using the Deep control gets it really low.
|ric4682 ||01-01-2014 11:30 AM |
I'll check that out! Do any Markbass heads do 2 ohm? They always sounded warm and fat to me.
Powered by vBulletin® Version 3.6.12
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.