What's the best way to stack this Trace Elliot cab combination?

[AlmightyPancake]

So, I have settled on what my full setup will look like by the end of October, hopefully.

Two heads: An old AH250 and the AH600. Since the AH250 has only one speaker out, I'll get the 1518 (or the 1524 if I can find one!) and run a low pass filter at around 800hz into that.

The AH600 will run into the 1028H and a 1048 at full range, with some lows rolled off on the EQ itself and some heavy low end compression.

What would be the best way for me to stack these cabinets? I'm guessing the 15 on the bottom, the 4x10 on top of that, and the 2x10 on top of that. For any smaller shows, I can use only one or two of the cabs and just the AH600.

[BassmanPaul]

First tell us the impedances of the three cabinets.

[RickenBoogie]

Sounds like a huge bunch of stuff- what are you trying to accomplish? The mixed speaker sized would be alright with a crossover, but the lows will need significantly more power than the rest.

[will33]

Run the 210 and the 410 fullrange off the most powerful head and call that your gig rig. Consider the 15 and the smaller amp a separate small rig for rehearsals/small gigs. Piling it all together won't add much of anything other than weight and packspace.