Active elctroninic battery compartment

[Lowner]

I bought this awesome Yamaha bass at a pawn shop fro next to nothing and the only major thing wrong is that the battery compartment is missing which causes the battery to fall out while playing. Can I get a replacement or what what is a good substitute for the battery cover?

[gottawalk]

Originally Posted by Lowner

I bought this awesome Yamaha bass at a pawn shop fro next to nothing and the only major thing wrong is that the battery compartment is missing which causes the battery to fall out while playing. Can I get a replacement or what what is a good substitute for the battery cover?

Okay; first, how can the whole "compartment" be missing? Is it just the cover? If so, have you contacted Yamaha? Try checking their website for parts info. Check with a local guitar shop and see if they have parts laying around, or they will probably have contacts to get parts. I'm not familiar with the interior of the Yamaha bass, especially without the model number, so your best bet is to probably check with a guitar shop in your area. If you give me the model number or style of the bass, maybe I could "google" some info and help out a little if I find anything. I think Yamaha's put out quite a few bass styles.

Oh, yeah; McGyver says, "Duct tape works wonders!"

Good luck.

[Lowner]

I meant the battery compartment cover. Excuse me for being a bad typist. My fingers don't move over the keys on my keyboard as fast as my brian thinks. Its the battery compartment cover thats missing.

[bassicinstinct]

How is Brian by the way?

[Hambone]

Originally Posted by Lowner

I meant the battery compartment cover. Excuse me for being a bad typist. My fingers don't move over the keys on my keyboard as fast as my brian thinks. Its the battery compartment cover thats missing.

One can be made from lots of materials around the house and home shop -

Pickguard material
Formica
Wood veneer
Hard thin plastic of any kind:
Another cavity cover
An old toy
An old record
A CD
A CD case
A cassette case
An old samsonite suitcase
An old briefcase
A thin piece of aluminum

To make a pattern simply tape a piece of light paper across the cavity and get a dirty finger - that's right, a dirty finger - and rub the edge of the cavity through the paper to make a nice line showing the exact shape of the opening. Tape this to the new material and cut it out with a sharp X-acto knife. If it's got round corners, cut it square first, then round the corners. For the holes, you can eyeball the general location and drill a small hole - then see how it lines up. Of course if you used clear plastic it won't be a problem but if it doesn't, just start enlarging the hole by reaming it out a little at a time until you expose the screwhole in the body. If you've got a countersink bit to make the beveled hole great! If not, just use a larger drill bit by hand and spin it between your thumb and forefinger to enlarge the top side of the hole. Then mount it with a couple of pickguard screws and go play.

OR, go to a repairman and pay him $20 to do the same thing.

[Ostinato]

Originally Posted by Lowner

My fingers don't move over the keys on my keyboard as fast as my brian thinks.

See what happens when you have someone to do the thinking for you?

[Mottlefeeder]

Originally Posted by Hambone

To make a pattern simply ...
... For the holes, you can eyeball the general location and drill a small hole ...
... Then mount it with a couple of pickguard screws and go play.

On my Yamaha, the battery cover is a clip-in design, as i believe it is on many of the others. Your DIY design would only work on those if you made screw holes in the bass, which i would not recommend.

[Hambone]

Originally Posted by Mottlefeeder

On my Yamaha, the battery cover is a clip-in design, as i believe it is on many of the others. Your DIY design would only work on those if you made screw holes in the bass, which i would not recommend.

Well now, wouldn't that have been a nice piece of info to have in the first place? Geez, do you think this is a two way TV or something?