Body: All Parts 3 Tone Sunburst
Neck: Mighty Mite Maple/Maple
Pickguard: 4 Ply Tort
PUs: Fender Custom Shop 60s
Pots/Wiring: CTS 250K ohm pots solid shafts, orange cap .047Bridge: Fender Vintage Threaded
Strings: D'addario EXL220BT balanced tension
NeckPlate: Fender Corona California Logo
Tuning Machines: Mighty Mite
String Tree/Guide: Fender
Anticipated Mods: Neck Inserts
Fedex will be here later today with the high strength steel hex drive inserts and the 18-8 stainless oval head phillips machine screws from McMaster-Carr.
Neck arrived this morning and looks better than I expected for the price. Was used but only see very light scuffing on frets and no other issues visualy.
Picked up a new drill press, fence table and forstner bit set yesterday.
Q: What is the correct and or easiest way to make a cual/block/jig for placing under fretboard side of neck for drilling insert holes? I took a piece of pine 2x4 and drew out my fretboard radius profile on each end to get an idea of what needs to happen but not having much luck with the cheap rasp I have.
Thanks; sure there will be more questions as I go