Buying Squier replacement parts

robojam · #1 01-17-2007, 09:14 AM

Does anyone know of a good place I can get replacement bridge saddles for my Squier P-Bass Special? I'll buy a new bridge if I have to, but if I can get the saddles for a couple of bucks I'll do that. Also, I'd rather not take the bridge off and replace it if I do

n't really need to.

I'll buy online if someone knows of a good website, but if anyone knows of a store near York, SC that would be great. The nearest cities to me are Rock Hill, SC and Charlotte, NC. I've tried places like Guitar Center and Sam Ash in Charlotte, but they have just tried selling me a new bridge.

pj-mike · #2 01-17-2007, 11:28 AM

You can buy a set of 4 saddles at www.guitarpartsresource.com. Unfortunately its not for a couple of bucks. However, you will not have to remove the bridge.

Belgand · #3 08-28-2007, 12:04 AM

In a similar vein I've got a problem with my Ibanez GSR's stock bridge. I bought the bass used and it wasn't until I was putting some new strings on today that I noticed that the D string saddle has a more or less completely stripped screw head (i.e. the screw and hole are fine, but the head is gouged out). Since the screw still works I tried turning it with pliers, but that didn't work.

Basically, should I be able to just go down to the hardware store and pick up a new screw that'll fit or do I need to buy a special screw (and if so, how) or, even worse, a new bridge entirely?

202dy · #4 08-28-2007, 05:47 AM

Quote:

Originally Posted by Belgand

In a similar vein I've got a problem with my Ibanez GSR's stock bridge. I bought the bass used and it wasn't until I was putting some new strings on today that I noticed that the D string saddle has a more or less completely stripped screw head (i.e. the screw and hole are fine, but the head is gouged out). Since the screw still works I tried turning it with pliers, but that didn't work.

Basically, should I be able to just go down to the hardware store and pick up a new screw that'll fit or do I need to buy a special screw (and if so, how) or, even worse, a new bridge entirely?

Why not go down to the local Ibanez dealer instead? They can obtain the right parts quickly and will be happy to make a new friend. If there is not a B&M that carries Ibanez locally contact them directly through their website.

Belgand · #5 08-28-2007, 10:04 AM

Quote:

Originally Posted by 202dy

Why not go down to the local Ibanez dealer instead? They can obtain the right parts quickly and will be happy to make a new friend. If there is not a B&M that carries Ibanez locally contact them directly through their website.

I guess I can certainly try, but I'm willing to bet that the hardware store costs a lot less.

202dy · #6 08-28-2007, 11:22 AM

Quote:

Originally Posted by Belgand

I guess I can certainly try, but I'm willing to bet that the hardware store costs a lot less.

Maybe. But it is only a couple of screws. There are several other issues. The first is matching hardware. Chrome plated or nickel plated screws are rarely found at the hardware store. AAMOF, they are rarely found at machine shop suppliers. While specialty fastener suppliers may be able to obtain them they will require a quantity order. Granted, a Squier P or an Ibanez GSR is probably not a candidate for future vintage glory nor the monetary rewards therein, it is still nice to have the right fit an finish. The second issue is fit. Again, it is difficult to find screws that fit at the hardware store.

As far as what a retailer will charge for the parts, if it is just one or two screws, many of the savvy operators will just put them in your hand and send you on your way. It is a cheap way to earn your respect and your business.

cessna928 · #7 03-06-2009, 05:03 PM

To be honest, you'd be better off replacing the bridge with a badass 2. Even though it'd cost about 70 bucks, you'd effectively fix your problem and give yourself a better instrument.

cessna928 · #8 03-07-2009, 07:24 AM

Quote:

Originally Posted by Belgand

In a similar vein I've got a problem with my Ibanez GSR's stock bridge. I bought the bass used and it wasn't until I was putting some new strings on today that I noticed that the D string saddle has a more or less completely stripped screw head (i.e. the screw and hole are fine, but the head is gouged out). Since the screw still works I tried turning it with pliers, but that didn't work.

Basically, should I be able to just go down to the hardware store and pick up a new screw that'll fit or do I need to buy a special screw (and if so, how) or, even worse, a new bridge entirely?

One of the most useful quick fixes you can find for solving the stripped screw problem is to take a fine hacksaw and cut a slot in the screw (basically making a phillips screw into a flat head). This will last a surpisingly long time, but you ultimately the best thing to do is to talk to your local luither, they often get the small parts for popular guitars in bulk.