Case Lining Repair

[LSquared]

I have a ~40 yr old case, and the strip of lining along the front edge hs come loose. Any suggestions as to the best adhesive to re-attach it? I don't want to end up damaging the material, or use soemthing that might out-gas and affect my bass (or is that just silly?). Any thoughts are appreciated.



Aside: I obtained this case in 1979, with my Guild Jetstar, but it fits my Hagstrom HIIB nicely too (as shown). I beleive it is the original Guild case (circa '67), but not positive.

THANKS!

[SurferJoe46]

There are some aircraft upholstery cements that don't out gas after cure time and they will work very well. Unfortunately you can't find them in anywhere but a specialty store for the trade.

I built a few pylon racers in the 1920s style when I was air racing.

Let me Google a supplier I use and see if they have a facility that stocks that for you. BRB.

I use 581 for things like this, and it's FAA approved. Here's a link.

[Bass-Adrenaline]

Id suggest trying to find some upholstry spray glue in a can as well.