Essex Jazz Bass Neck issue
I recently picked up a used Essex Traditional Series Jazz bass copy. This is a Chinese instrument that plays fairly well and sounds quite good for the money. I used it on a track a couple days ago and it recorded surprisingly well.
I wanted to use it for another track tonight which was going to utilize a lot of open strings and the first couple frets when I realized it has a serious back bow in the neck causing major buzz in that position.
It seems to have a truss rod that is adjustable from the headstock, but I'm not familiar with this style at all. Does anyone know about these basses and how to loosen the tension on the neck? Clockwise or counter clockwise?
It seems to take an allan wrench but before I possibly strip this, I wanted to ask here. I've pulled the neck and the truss rod is only visible at the headstock, not at the end of the neck.
OK, I was able to glean as bit of info from several similar posts (who knew there were that many Essex Basses with neck issues?). I was able to adjust the neck (Counterclockwise in this case) and re-assemble the bass. For the record, I don't think this has a double action truss rod as suggested in another post. It loosened but never got tighter in the other direction as other double action truss rods I've had did. Also, it did not take a 4mm neck wrench, Had to go bigger.
That and a bit a tweaking on the bridge feet will get me through the session. It's a demo only so I can take some time for a more serious set up later. I'm thinking neck shims...
As you note the double-acting mechanism will get tight turning either way. A true truss rod will just loosen up. As for wrench size hard to say. Usually the one that comes with a new SX fit it. But used you just have to try them. I have two allen wrench sets...one metric and one SAE...Got em cheap at Harbor Freight tool store. You just try them until you find the right size. There seems to be no "standard" SX Truss rod wrench size. Once you find it, you go to a hardware store that sells individual allen wrenches and buy one (or two) in that size to throw into the case. In fact, what I do is go buy an allen wrench for ALL screws on the bass that take them...saddles, knobs, truss rod...whatever and make a little kit with screwdrivers that fit the screws (like say cover plate) as a little emergency kit to go into the case or gig bag.
The problem with some SX necks is that they are made flat. The string tension is supposed to pull them forward and the truss rod to bend them back where you want it. Sometimes they don't go farward enough! So the deal is you have to totally loosen the truss rod (until it rattles) and leave the string tension on the bass until the neck pulls forward enough. In resistant cases you have to tune all strings up a half or full step to get more tension on the neck and then let it sit a week or two.
I do have a couple SX where even after treatment no truss rod tension is needed. They play fine but you do need to put just enough tension on the truss rod to keep it from rattling, but not enough to back-bow the neck.
Thanks! I was able to use a 5mm wrench on this one and loosened it to what I would consider fully loose but not rattling. That made a big difference. I then shimmed the neck a bit more (3 pieces of card stock plus an original pice of cardboard already in there) and that made all the difference in the world. A little tweaking of the tailpiece feet and it plays quite nice.
I'm primarily a guitarist and second on bass, so this has been a learning experience for me. I picked this Essex up last fall for $20.00 at a yard sale and have been pleasantly surprised at the tone.
My main bass is a 1960 era Mosrite which has superb tone, but has intonation issues. Talk about low end, it has the old Craig Anderton designed pickups and sound incredible, but doesn't record well as a result. I've tried setting the intonation and if I recall correctly (been several years now), the bridge placement is off a bit.
|All times are GMT -6. The time now is 04:27 AM.|
Powered by vBulletin® Version 3.6.12
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.