Hey guys, I've posted before on wanting to mod my wiring harness on my Jazz before. Currently, my 2006 MIM jazz has model J's and a standard wiring harness. Before, I had some crazy ideas about mods, but I was want to keep it simple now.
I should mention that before I mod anything, I'm going back to single coils. I hated the stock pups, and the Model J's were a breath of fresh air and worked great for the rock band I used to be in. But, I feel my Jazz needs to be a Jazz. I need that alnico sound back in my life.
I'm either getting some lindy fralin or nordstrand single coils when funds permit. After that, its finally mod time.
THE MOD
I want to install a parallel/series mod. that's it. at one time I thought doing stack concentric controls with a parallel/series switch, but I don't think that would fit a standard jack plate and i didn't want any routing and it just seemed eccentric. SO, I'm keeping it simple.
My question is what parts would I require to pull this off and where I could finding a wiring diagram. I'm thinking all I need is a 250k Push/pull pot for the neck volume, 250k pot for the bridge volume, 250k pot for the tone and the tone capacitor, right? Any help is appreciated, I want to know all the facts before I go do any of this. =)
