TalkBass Forums

TalkBass Forums (http://www.talkbass.com/forum/)
-   Hardware, Setup & Repair [BG] (http://www.talkbass.com/forum/f18/)
-   -   Help find the color. (http://www.talkbass.com/forum/f18/help-find-color-940352/)

gimp 12-13-2012 01:19 PM

Help find the color.
 
I'm trying to restore a bass back to it's original color. Can someone tell me what the color name is, and if a vendor like reranch carries it (they have quite a few "whites")?

Example of the color:

elgecko 12-13-2012 01:21 PM

Hard to tell from the pic but I'll go Vintage White. It's too off-white to be Olympic.

benc 12-13-2012 01:24 PM

It looks like a Fender MIM. Is that right? What are the first three digits of the serial number?

lijazz 12-13-2012 01:26 PM

I think it IS Olympic White. I have a 2008 MIA Jazz in Oly White and the color looks pretty much the same as this pic.

gimp 12-13-2012 01:26 PM

The body is the only original part and it is a MIM (the picture above is an example shot - not the actual bass).

gimp 12-13-2012 01:27 PM

It was my first "real" bass that has been modified and upgraded (and sometimes downgraded) over the past 15 years. I'm trying to bring the body/pickguard back to the original look (right now it's rattle can black).

benc 12-13-2012 01:29 PM

If MIM, it is definitely Arctic White.

gimp 12-13-2012 01:31 PM

Awesome! Thank you very much!

wcoffey81 12-13-2012 01:38 PM

one other option you have is to take it to a local bodyshop supply business. if they supply and mix paint for bodyshops they will, probably, have an optical scanner that "looks" at the finish. it will then spit out a formula so they can match what you have.

whoops i didn't read every post. you would need to sand a spot down to the original color for the scanner to work

gimp 12-13-2012 02:35 PM

While I have your ear, what color pickguard would that be? White or parchment?

benc 12-13-2012 02:45 PM

If it was made before 2001:
Part No. 0037737000 Pickguard, P Bass Mexico, White/Black/White

2001 and later:
0058261000 Pickguard, P Bass Mexico, White/Black/White

:)

DwaynieAD 12-13-2012 03:47 PM

arctic white is my first guess

gimp 12-13-2012 05:41 PM

Quote:

Originally Posted by benc (Post 13574055)
If it was made before 2001:
Part No. 0037737000 Pickguard, P Bass Mexico, White/Black/White

2001 and later:
0058261000 Pickguard, P Bass Mexico, White/Black/White

:)

1995. That's awesome. Thank you!

benc 12-13-2012 06:28 PM

My pleasure. I cut and pasted the pickguard info from the service diagrams on the Fender site. Yours is this one. You may have a tough time finding those 1990's Standard Series parts. I searched for your pickguard and couldn't find it for sale anywhere. The 2001 guard or any 13-hole guard should work fine, though. :)

gimp 12-13-2012 06:30 PM

Yeah, I was searching and didn't find much. It's good to hear that any 13 hole unit will work. I assume bright white is pretty much the color. I don't need it to be 100%, but I am nostalgic for the way the body used to look.


All times are GMT -6. The time now is 04:41 PM.

Powered by vBulletin® Version 3.6.12
Copyright ©2000 - 2013, Jelsoft Enterprises Ltd.