Go Back   TalkBass Forums > Bass Guitar Forums > Bass Guitar Forums > Hardware, Setup & Repair [BG]
Register Rules/FAQ/CUP Members List Search Today's Posts Mark Forums Read



Supporting Membership
Thank You

Latest Supporting Member
Donate to Upgrade Today

Reply
 
Thread Tools Search this Thread
  #1  
Old 11-19-2007, 01:14 PM
ubado's Avatar
M E T S ... Mets, Mets, Mets!
 
Join Date: Mar 2007
Location: NC. Residential Tourist
Supporting Member
How do you store a neck that you're not going to use?

Sign in to disble this ad
I'm not sure if this is the right spot to put this thread.... but here it goes anyway.

I just picked up a Fender Jazz neck to replace my Precision neck. How do I go about setting up the Precision neck for a long period of non-use?
(ie. Do I back down the truss-rod so that there is no relief or back bow... OR... will it be ok to just take it off and put it away as is).

Thanks for the help.

Cheers!
__________________

Elrick Classic Gold 5 / Clover Bass-Tard 5 FL-Custom / 1970 Fender Precision PJ
Elrick #31
  #2  
Old 11-19-2007, 01:20 PM
Registered User
 
Join Date: Aug 2007
Location: Union City, California
Send a message via AIM to meev992 Send a message via MSN to meev992 Send a message via Yahoo to meev992
I currently have a Stratocaster-style guitar neck on the headboard of my bed. I never un-did the truss rod or anything, and I don't notice any bowing. I used to keep it in an old guitar bag, wrapped up in grocery bags. Nowadays, i just let it collect dust.

that's my personal experience with storing instrument necks.

Edit:

Just checked my neck, the truss rod was never tightened to begin with

so yes, undo the truss rod

Last edited by meev992 : 11-19-2007 at 01:38 PM.
  #3  
Old 11-19-2007, 01:29 PM
Jazz Ad's Avatar
I took the one less traveled by
 
Join Date: Mar 2002
Location: Reims, Champagne, France
GOLD Supporting Member
Unscrew the truss rod completely to avoid warping, store it flat and you won't have problems.
  #4  
Old 11-23-2007, 03:31 PM
ubado's Avatar
M E T S ... Mets, Mets, Mets!
 
Join Date: Mar 2007
Location: NC. Residential Tourist
Supporting Member
Thanks guys.
I just got my Fender JP-90 neck and set it up today.
Now the "P" neck is gonna get stored for a while. Before I removed it... it had very little relief... thinking I might back it off a bit (wrap it up and put in some silica gel packets in there too).

Please shoot me any other ideas.

A bit off subject... A funny thing I noticed the P-bass has an 83' serial number, but the neck is stamped February of 84'.

Cheers!
__________________

Elrick Classic Gold 5 / Clover Bass-Tard 5 FL-Custom / 1970 Fender Precision PJ
Elrick #31
  #5  
Old 11-23-2007, 03:52 PM
Registered User
 
Join Date: Sep 2006
Supporting Member
Quote:
Originally Posted by ubado View Post
Thanks guys.
I just got my Fender JP-90 neck and set it up today.
Now the "P" neck is gonna get stored for a while. Before I removed it... it had very little relief... thinking I might back it off a bit (wrap it up and put in some silica gel packets in there too).

Please shoot me any other ideas.

A bit off subject... A funny thing I noticed the P-bass has an 83' serial number, but the neck is stamped February of 84'.

Cheers!
A single action rod should be made slack. Double action rods should be taken to the neutral position. No force should be on the neck at all. It does not matter what condition the neck was it when it was subject to any forces. The only thing that matters is setting up the neck for the new condition. It is in fact a set up for no force. Straight edges may be employed.

The wood should be allowed to remain at equilibrium moisture content for your area of the country. However, 40-60% relative humidity is best. Silica gel absorbs moisture. If you should decide to employ it be aware that in extreme arid conditions wood may crack, split, and in general forget that it is supposed to stay glued together. If you feel you must use some type of chemical device to maintain the humidity then use the silica beads that cigar smokers use in their humidors. But understand this concept will require your attention vis a vis maintenance with distilled water.

Fender has always been a thrifty company. In the past, when they had left over decals they did not throw them away for some silly reason like New Year's Day. They used them up and then printed up new ones with a proper date. Fender considered the serial numbers as a way to authenticate an individual instrument, not as a way to date a valuable antique. Some Fender guitars from the late seventies may sport a '77 serial number and a '79 neck date. Remember, in 1984 a 1968 P bass was merely a used guitar that was considered to be better than what was being manufactured currently. Think "they don't make them like the used to" kind of mentality. The vintage market place was in it's infancy. If there was a premium to be paid it was because the bass was thought to be "better" not because it had collectible value. Your bass is an '84. There is no reason to raise an eyebrow.
  #6  
Old 11-23-2007, 04:17 PM
ubado's Avatar
M E T S ... Mets, Mets, Mets!
 
Join Date: Mar 2007
Location: NC. Residential Tourist
Supporting Member
Thanks 202dy for the insight.

Yup, it's a dual truss rod so I'll make it neutral... with no packets.

As far as the dating... the Precision Elite II's were only supposed to have been during 83'... I imagine that the 84' date was due to some sort of back order, since it's only 2 months into 84'

Thanks again & Cheers!
__________________

Elrick Classic Gold 5 / Clover Bass-Tard 5 FL-Custom / 1970 Fender Precision PJ
Elrick #31
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Follow TalkBass on Twitter   Visit TalkBass on Facebook  

All times are GMT -6. The time now is 07:13 AM.




Copyright 2011 Talk Music Group Inc. All rights reserved.
Play guitar? Visit our new sister site TalkGuitar.com [beta]
Powered by vBulletin® Version 3.6.12
Copyright ©2000 - 2012, Jelsoft Enterprises Ltd.